Restore Smooth Walls and Ceilings Quickly

Drywall hanging, patching, and texture matching for Winston-Salem homes after leaks, renovations, or general wear and tear.

Drywall problems show up as cracks along seams, holes from doorknobs or furniture, water stains that bubble and peel, or uneven patches that never quite matched the rest of the wall. These issues are common in Winston-Salem homes, especially older ones where settling foundations and temperature shifts stress the joints over time. J.A. Roofing & Construction handles drywall hanging for new construction and additions, as well as repairs that blend seamlessly with existing surfaces so you can move forward with painting or other upgrades.

The process depends on the scope of damage. Small holes and cracks get patched with joint compound, sanded smooth, and textured to match the surrounding area. Larger damaged sections require cutting out the affected drywall, securing a new piece to the studs, taping the seams, and applying multiple coats of compound before sanding and finishing. For full room installations, sheets are measured, cut, and screwed into place with attention to alignment and minimal seams.

J.A. Roofing & Construction provides fast turnaround and clean finishes for homeowners in Winston-Salem ready to repair walls and ceilings without disruption.

How Drywall Repairs Handle Different Types of Damage

Repairs begin with assessing the damage and determining whether the drywall itself needs replacement or if the surface can be patched. In Winston-Salem, water damage from roof leaks or plumbing issues often softens drywall to the point where it crumbles under pressure, which means cutting out the damaged section and installing a new piece. The crew uses a utility knife to score clean edges, attaches the new drywall with screws, and applies mesh tape along the seams to prevent future cracking.

Once the patch is in place, joint compound is applied in thin layers, allowed to dry, and sanded until the surface sits flush with the surrounding wall. You will not see a ridge or discoloration where the repair was made, and the texture will match whether your walls are smooth, knocked down, or have an orange peel finish.

For larger projects such as finishing a basement or adding a room, full sheets are hung with staggered seams to reduce the chance of cracks forming later. The finishing process is the same, but it covers a much larger area and prepares the space for primer and paint. This service does not include painting, but it leaves walls ready for whatever finish you plan to apply.

You Can Ask About the Process Anytime

People often want to know how long repairs will take, whether old texture can be matched, and what preparation is needed before the crew arrives, so these questions cover the practical details that come up before scheduling.

Sticky note with a question mark.
What types of drywall damage can be repaired?
Small holes, cracks, water stains, damaged corners, and sections softened by moisture can all be repaired. If the damage is extensive or covers most of a wall, replacement may be more efficient than patching.
A sticky note with a question mark on it, held by a paperclip.
How does J.A. Roofing & Construction match existing wall texture?
The crew applies joint compound or spray texture to match the pattern on your existing walls, whether that is smooth, knocked down, or orange peel. Samples are tested on scrap material before applying to the repaired area.
A question mark icon on a sticky note.
How long does drywall repair take in Winston-Salem?
Small repairs often finish in a few hours, while larger sections or full room installations may take one to two days depending on drying time between coats. You will have a clear timeline before work begins.
Sticky note with question mark, pinned at the top.
What should I do to prepare for drywall work?
Clear furniture and belongings away from the walls being repaired, and cover floors if you want extra protection from dust. The crew will handle the rest, including cleanup after sanding.
Question mark symbol on a sticky note.
Why does drywall crack along seams?
Cracks form when houses settle, temperature changes cause expansion and contraction, or the original taping was not done with enough joint compound or mesh reinforcement. Proper taping and multiple coats prevent this from happening again.

J.A. Roofing & Construction works with homeowners across Winston-Salem who need drywall repairs that look like the damage was never there. Whether you are dealing with water damage, renovation prep, or everyday wear, the team can assess the situation and provide a free estimate with a clear explanation of what the work will involve.